MCS505 - Advanced Structural Engineering Methods Part 1

Project Description

The following figure illustrates a reinforced concrete corbel attached to a column and subjected to a vertical load F. Assuming the bottom and the top of the column are fixed, perform a Finite Element Analysis (Abaqus preferred) to determine the stress distribution and the maximum displacement at the corbel.

Assume homogeneous material properties for the structure. The Young’s modulus of the material is E=(20+0.15Z) GPa, and the poisson’s ratio of it is v=(0.2+0.001Z), where Z is the sum of student ID numbers. Eg: Student with student number 20991 will need to sum up these numbers 2 + 0 + 9 + 9 + 1 = 21. So they will take an E value of 20 + 0.15 × 21 = 23.15 and a v value=0.2+0.001× 21=0.221.

Hint: This can be considered as a plane stress problem. You can assume a thickness of the column/corbel if necessary. You may want to consider the concentrated load as a distributed load due to the existence of the loading pad, that said, you don’t need to include the loading pad itself in your model.

Part 1: Tasks

Your tasks include: a) Assume and indicate clearly appropriate dimensions, material properties of the structure and appropriate location and value of the load F (10 marks) b) Mesh size convergence study on the maximum displacement of the corbel. Summarize the convergence study results by a table or figure (30 marks) c) Determine the maximum stress in the corbel structure and its location (Hint: report the max.In-plane Principal stress in a plane stress problem simulated using Abaqus) (10 marks) d) Adequate discussion of the results and simulation details.

Part 2: Reporting details of Abaqus simulation

You are expected to report details (screenshots with brief text descriptions) of the following steps for at least one round of the finite element analysis:

1. Create a model of the structure

2. Assign material and section properties

3. Create assembly and step

4. Create mesh

5. Assign boundary conditions and loads

6. Create and submit job

7. Visualize results (stress and displacement)

Visit Here: Civil Engineering Assignment Help

3: Self-reflection to achieve EA Stage 1 Competencies

Write a Short Reflection Answering the Following Questions

1. What skills or knowledge did I gain from this project/task, and how can I apply these in future projects?

2. How have I applied engineering principles to develop, design, and implement solutions in this project or assignment? What challenges did I encounter, and how did I overcome them?

3. What was my overall reflection on this project/task, and what insights or lessons did I gain that will help me grow as an engineer/engineering technician/engineering technologist?

Read More: ABAQUS Assignment Help

Abaqus Guide for Engineering Student

Looking For Complete Assignment Sample Get It On WhatsApp