Solution Code: 1AHAG

Question:Mechanical Engineering

This assignment falls under Mechanical Engineering which was successfully solved by the assignment writing experts at Grade Saviours under assignment help service.

Mechanical Engineering Assignment

Assignment Task

Question A Figure Q2-A shows two gears A and C attached to a shaft supported by bearing and B and D. Forces acted on gear A and C are 180 N and 200 N respectively. Draw load, shear force, bending moment and shaft torsional moment diagrams for the shaft, in both XY and XZ planes, and then locate the most endangered x-section of the shaft. You need to determine the shaft and size fittings and then the drawing of the shaft.

The assignment file was solved by professionalMechanical Engineering experts and academic professionals at Grade Saviours. The solution file, as per the marking rubric, is of high quality and 100% original (as reported by Plagiarism). The assignment help was delivered to the student within the 2-3 days to submission. Looking for a new solution for this exact same question? Our assignment help professionals can help you with that. With a clientele based in top Australian universities, Grade Saviours’s assignment writing service is aiding thousands of students to achieve good scores in their academics. OurMechanical Engineering assignment experts are proficient with following the marking rubric and adhering to the referencing style guidelines.

Solution:

Force tangential to Gear A = FA * Cos(18) = 180*Cos(18) N = 171.19 N Force perpendicular to Gear A = FA * Sin(18) = 180*Sin(18) N = 55.623 N Perpendicular force will create bending, and maximum bending moment will occur close to bearing B = 55.623*0.016Nm=0.89 Nm Due to tangential force uniform counter clock wise moment about X axis will be created = 171.19*0.011 Nm= 1.883 Nm Due to gear C Force tangential to Gear C = FC* Cos(18) = 200*Cos(18) N = 190.211 N Force perpendicular to Gear C = FC * Sin(18) = 200*Sin(18) N = 61.8 N The reaction at the bearing D = 61.8*26/66=24.35 N The reaction at the bearing B = 61.8*40/66=37.45 N Bending moment on shaft near bearing B = 24.35*0.066 -61.8*0.026=0.0003 Due to tangential force uniform counter clock wise moment about X axis will be created = 190.211*0.024 Nm= 4.565 Nm Clock wise on shaft from gear C to bearing B

ThisMechanical Engineering assignment sample was powered by the assignment writing experts of Grade Saviours. You can free download thisMechanical Engineering assessment answer for reference. This solvedMechanical Engineering assignment sample is only for reference purpose and not to be submitted to your university. For a fresh solution to this question, fill the form here and get our professional assignment help.

Hey MAS, I need Assignment Sample of

Looking For Complete Assignment Sample

Get It On WhatsApp